[Airplane Mode] - Panasonic Lumix DMC-TZ60 Basic Operating Instructions Manual

Wi-Fi/NFC
●
The camera cannot be used to connect to a public wireless LAN connection.
●
Use a IEEE802.11b, IEEE802.11g or IEEE802.11n compatible device when using a
wireless access point.
●
We recommend that you use a fully charged battery when you send pictures.
●
When the battery indicator is flashing red, the connection with other equipment may
not start or the connection may be disrupted. (A message such as [Communication
error] is displayed.)
●
When sending images on a mobile network, high packet communication fees may be
incurred depending on the details of your contract.
●
Pictures may not be completely sent depending on radio wave conditions. If the
connection is terminated while sending pictures, pictures with missing sections may
be sent.
●
Do not remove the memory card or battery or move to an area without any
reception while sending images.
●
The LCD monitor display may become distorted for an instant while connected to the
service, however this will not affect the image being sent.

[Airplane Mode]

To disable Wi-Fi connection, set [Airplane Mode] to [ON].
Select [Airplane Mode] from [Setup] menu and press
[MENU/SET]
Use cursor button to select [ON] and press [MENU/SET]
●
Electromagnetic waves from the camera can affect instruments and meters. In
airplane cabins or in other restricted areas, set [Airplane Mode] to [ON].
(→60)
- 187 -
Wi-Fi ® Function and NFC Function
VQT5E85