Panasonic Lumix DMC-TZ60 Basic Operating Instructions Manual page 341

Others
[Read Error] / [Write Error]
●
Data read has failed.
→ Check whether card has been inserted correctly (→24).
●
Data write has failed.
→ Turn off the camera and remove the card. Reinsert the card and turn the camera on again.
●
Card may possibly be damaged.
→ Try with a different card.
[Cannot record due to incompatible format(NTSC/PAL) data on this card.]
●
Format the card after saving necessary data on a PC etc.
→ Insert a different card.
[Motion recording was cancelled due to the limitation of the writing speed of the card]
●
Motion picture recording may be automatically terminated with certain cards.
→ If recording stops even when using a card of the recommended speed class (→25), the data writing
speed has dropped. If this happens, we recommend backing up the data on the memory card
and formatting it (→74).
[A folder cannot be created]
●
Folder numbers in use have reached 999.
→ Save needed data on a computer or other device, and then use [Format] on the camera (→74).
Folder number is reset to 100 when performing [No.Reset] (→71).
[Picture is displayed for 16:9 TV]
●
AV cable (optional) is connected to camera.
→ To remove message immediately → Press [MENU/SET].
→ To change aspect ratio → Change [TV Aspect] (→72).
●
USB connection cable (supplied) is only connected to camera.
→ Message disappears when cable is also connected to another device.
[This battery cannot be used]
●
Use a genuine Panasonic battery.
●
Battery cannot be recognised as terminal is dirty.
→ Wipe any dirt away from the battery terminal.
[GPS feature is not available in this region.]
●
GPS may not work in China or in the border regions of countries neighbouring China. (Current as of
January 2014)
[Recording failed.]
●
Recording may be impossible if the recording location for a 3D image is too dark/too bright, or if the
subject lacks contrast.
[Please check the card]
[Picture is displayed for 4:3 TV]
- 301 -
(→74)
Message displays
VQT5E85