Usb Mode; Viera Link - Panasonic LUMIX DC-FZ80 Owner's Manual

[USB Mode]

Select communication method for when connecting camera to a computer or printer with
USB connection cable (supplied).
[Select on connection]
[PictBridge(PTP)]
[PC]
[TV Connection]
■
[HDMI Mode (Play)]
Set the format for the output.
[AUTO] Automatically sets the output resolution based on information from a connected TV.
Outputs pictures with a output resolution of 3840×2160 pixels using a progressive scan
[4K]
method for the number of effective scanning lines (2,160 lines).
Outputs pictures using a progressive scan method for the number of effective scanning
[1080p]
lines (1,080 lines).
Outputs pictures using an interlace scan method for the number of effective scanning
[1080i]
lines (1,080 lines).
Outputs pictures using a progressive scan method for the number of effective scanning
[720p]
lines (720 lines).
Outputs pictures using a progressive scan method for the number of effective scanning
[480p]
lines (480 lines).
●
If no image appears on the TV with [AUTO], switch the setting to a constant setting other than
[AUTO] to set a format supported by your TV. (Please read the operating instructions for the TV.)
■

[VIERA Link]

If you select [ON], operations of the camera and the VIERA Link compatible equipment
connected to the camera with an HDMI micro cable are automatically linked, enabling you
to control the camera with the remote control of the VIERA Link compatible equipment.
(→271)
206
Select communication method each time you connect to a
computer or PictBridge-compatible printer.
Select when connecting to a PictBridge-compatible printer.
Select when connecting to a computer.
Using Menu Functions
Menu list
→ [Setup]
DVQP1223