Burst Function; Recording Mode - Panasonic Lumix DMC-TZ60 Basic Operating Instructions Manual

Application (Record)

Burst function

■

Recording mode:

A burst of still pictures can be recorded while the shutter button is pressed fully.
Press [
Use to select [Burst] and press [MENU/SET]
• To change the burst setting, press the [DISP.] button and select a setting with
Setting
Approx. 2 - 10
*
1
pictures/sec.
Approx. 2
pictures/sec.
Approx. 5
pictures/sec.
*
1 [Intelligent Auto] Mode only
*
2 The number of burst pictures is limited by the picture-taking conditions and the type and/or
status of the card used.
] button ( )
Speed
• The burst speed is adjusted automatically in
accordance with the movements of people, pets
or other subjects. ([Intelligent Burst mode])
• When a fast-moving subject is recorded, the
frame rate becomes faster and the number
of pictures that can be recorded in a series is
restricted to about 10.
• The subject is brought into focus as far as this
is allowed by the burst speed (excluding [MF]).
However, when the burst function is operating
during motion picture recording, the focus is
fixed to the first picture.
• The pictures are taken with the burst function
while the exposure and White Balance are
being adjusted.
• The burst speed may be reduced under certain
recording conditions.
Description
- 102 -
No. of
pictures
100
100
(Continued on the next page)
VQT5E85
.
*
2