Creating MUTE Groups.
Press the SETUP button in the VCA/MUTES section. You will notice that the 8 USER
DEFINED buttons will illuminate YELLOW.
Press the one of the USER DEFINED buttons to create a Mute Group Master – it will
turn RED.
Soundcraft® Si Series Quick Start Guide Issue 1010
You may now press the SEL buttons above any of the input
channels you want to assign to that Mute Group. The SEL
buttons will turn ORANGE when selected.
To exit this mode press the SETUP button again.
Note! If you are making selections in input fader layer
A you may see other layer buttons illuminated red. The
RED illumination is to indicate that there are 'hidden' channels
assigned to the selected Mute Group although in this case they
are the same as the assignments made in Layer A. This
will also occur between layers B and D.
Page 25