Creating Vca Groups - SoundCraft Si Series Quick Start Manual

CREATING VCA AND MUTE GROUPS
The Si3 has 12 VCA Groups and 8 Mute Groups to which any input channel can be
assigned.

Creating VCA Groups:

Press the SETUP button in the VCA/MUTES section. You will notice that the 12
Output faders turn DARK BLUE, the SEL buttons turn YELLOW and the VCA button
illuminates in the OUTPUT FADERS SELECT section.
Note! If you are making selections you may see other layer buttons
illuminated blue. The blue illumination is to indicate that there are
'hidden' channels assigned to the selected VCA Group although in this
case they are the same as the assignments made in Layer A. This will
also occur between layers B and D.
Page 24
Press the SEL button above the VCA Master fader you
wish to assign some input faders too – it will turn WHITE.
You may now press the SEL buttons above any of the
input channels you want to assign to that VCA Group.
You will also notice that the small blocks on the right
hand side of the OLED displays above the channels you
have assigned to the VCA Group will turn solid to repre-
sent the chosen VCA
assignment. To exit this mode press the SETUP button
again.
Soundcraft® Si Series Quick Start Guide Issue 1010