Kidde SMOKE AND CARBON MONOXIDE ALARM User Manual page 7

Features
• One "chirp" every 30 seconds is an indication that
the alarm is malfunctioning. If this occurs call the
Consumer Hotline at 0800-917-0722 (Monday to Friday
9am - 5pm).
• Seven (7) years after initial power up, this unit will
"chirp" every 30 seconds to indicate that it is time to
replace the alarm.
• Loud 85 decibel alarm.
• Oversized test button for easy activation.
• Test button performs the following functions:
Tests the units electronics and verifies proper unit
operation.
Resets the unit during CO alarm
Peak Level Memory (See page15).
• Mounting bracket designed for easy orientation
of unit.
• Green and red LED lights that indicate
normal operation and alarm status.
Green Light: The green Light Emitting Diode (LED)
flashes every 30 seconds to indicate the unit is
operating properly. The green light also flashes before
a CO reading is taken and when any button is pressed.
Red Light: When a dangerous level of smoke or
carbon monoxide is detected the red Light Emitting
Diode (LED) will flash and the corresponding alarm
pattern (depending on the source) will sound. If the
unit malfunctions, the red LED light will flash and the
unit will chirp every 30 seconds indicating a system
problem.
• Powered by three (3) AA batteries.
• Battery lockout system that prohibits installation
without using three batteries.
• Tamper Resist Feature that deters children
and others from removing the alarm.
7