• Servicing of Batteries Should be Performed or Supervised by Trained Personnel with Knowledge of Batteries and the Required Precautions Chapter 1. Important Safety Instructions • When Replacing Batteries, Replace With the Same Quantity, Type & Capacity. • CAUTION – Do Not Dispose of Battery or Batteries in an open fire. The Battery May Explode.
Chapter 2. Introduction to the Rear Panel Chapter 3. Installation and Operation 2.1. Rear Panel Descriptions Note: The packing condition and the external outlook of the unit should be inspected carefully before installation. Retain the packing material for future use. Electric spec.
3.2. Selecting Installation Position 3.4. Installation Instructions Step 1 It is necessary to select a proper environment to install the unit, in order to minimize the possibility of damage to the battery bank and extend the life of the batteries. Please follow the instructions below: Step 2 3.2.1.
3.5. Battery Replacement RS23 2 Step 1 OUT PUT INP UT E xt. B atte ry N2 2 L2 1 L1 2 CB 1 Uti lity Inp ut B re aker To UPS Batte ry First Battery Bank To Exte nde d Ba tter y DC Br ea ker 3 0 A 25 0V dc To UPS Batte ry...
3.6. Storage Instruction Step 7 For extended storage through moderate climate(-15 to +30 °C / +5 to +86 °F), the batteries should be charged for 12 hours every 6 months by plugging the UPS power cord into the wall receptacle. Repeat this every 3 months under high temperature (+30 to +45 °C / +86 to +113 °F) environment.
Need help?
Do you have a question about the Rocforce and is the answer not in the manual?
Questions and answers