Connecting To A 10Base-T Network - Canon Laser Class 700 Series Setup Manual

Connecting to a 10Base-T Network

Connect the 10Base-T/100Base-TX cable to the hub port using a Category 3 or
higher rated twisted-pair LAN cable for use on a 10Base-T network. Then, connect
the 10Base-T/100Base-TX cable to the optional network card at the back of the
LASER CLASS 700 Series machine. If your computer is not compatible with a
10Base-T network, you would also need a 10Base-T network board.
10Base-T/100Base-TX
Port
NOTE
The hub, LAN cable, and network board that is connected to the LAN, should be
compatible with a 10Base-T network. For details, contact your local authorized Canon
dealer.
Computer with a
10Base-T Port
10Base-T Cable
10Base-T Hub
Making Connections
Computer without a
10Base-T Port
10Base-T
LAN Board
1-5
1