Features
NOTE:
The numbered features list in
Channel Select Switch (WM-2000 Only) -
Intercom Listen Key -
Call Key:
The channel select switch is used to switch between
intercom channels one and two. The switch lights green
for channel one and red for channel two.
The intercom listen key can be used in both momentary
(push-to-listen) and latching (hands-free listen) modes.
Momentary Mode -
Latching Mode for Hands-free Conversation -
The Call key is used to send call signals on the intercom
channel and to indicate incoming calls.
3
Press and hold the TALK button, then
speak into the microphone. The green
talk LED remains lit while the TALK
button is held. Release the TALK button
when finished talking. The talk LED
will turn off.
Tap the TALK button (do not press and
hold). The green talk LED turn on and
remains on. When finished talking, tap
the TALK button again. The talk LED
turns off.