Installation Space - Canon Laser Shot LBP2900 Getting Started Manual

CAUTION
•
Do not install the printer in any of the following locations. Doing so
may cause fire or electrical shock.
- A damp or dusty location
- A location exposed to smoke and steam, such as next to a stove or
humidifier.
- A location exposed to rain or snow
- A location near water faucets or water
- A location exposed to direct sunlight
- A location subject to high temperatures
- A location near open flames
•
Do not install the printer on an unsteady platform, an uneven surface,
or any other unstable location, or any location subject to vibrations.
If the printer falls down or the platform tips over, someone may be
injured.
IMPORTANT
Do not install the printer in any of the following locations. Doing so may
damage the printer.
- An environment where the temperature and/or humidity changes rapidly,
or where condensation occurs
- A poorly ventilated room
- Near devices that generate magnetic or electromagnetic waves
- In rooms such as laboratories where chemical reactions occur
- In a room where corrosive or poisonous chemicals such as salt or
ammonia are present in the air
- A platform that may warp from the weight of the printer and optional
equipment, or where the printer is liable to sink (such as on a carpet or
mat)
4

Installation Space

Choose an installation location where you can secure the following amount of free
space around the printer, and on a surface that can support the weight of the
printer. The dimensions of each of the printer components, the dimensions of the
space needed around the components, and the positions of the feet are as follows.
•Printer Dimensions
•Peripheral Space
Front View
585
75 75
•Feet Positions
32.8
Front View
32.8
(mm)
(mm)
171.3 46.5
171.3 46.5 (mm)