Canon Laser Shot LBP2900 Getting Started Manual page 12

•
Be careful not to hold or touch sensitive areas such as the sensor or
electrical contacts. Doing so may damage the toner cartridge.
Electrical
Step
Contacts
2
5
Place the toner cartridge on a flat surface, then slowly pull
out the sealing tape (approx. 50 cm in length) while
supporting the toner cartridge.
Pull the sealing tape out directly in the direction of the arrow.
CAUTION
If you pull on the sealing tape with excessive force or stop pulling
midway, toner may spray from the tape. If toner gets into your eyes or
mouth, wash it out immediately with cold water and consult a doctor.
12
Electrical
Contacts
IMPORTANT
•
Do not bend the tape or pull it up or down. If you do, the sealing tape may
break in the middle, and you won't be able to fully remove it.
•
Keep pulling on the tape until it is fully removed from the cartridge. If any
sealing tape is left inside the toner cartridge, you may experience printing
problems.
•
When pulling out the sealing tape, be careful not to hold the drum
protective shutter with your hands.
Drum Protective Shutter
•
After removing the packing materials, install the toner cartridge in the
printer as soon as possible.
•
Dispose of the sealing tape according to local regulations.