Removing the Packing Materials
Step
1
Cellophane tape and packing materials are attached to the printer to protect it
from vibrations and shocks during transport. Remove these pieces of tape and
packing material after you carry the printer to the installation site.
1
Remove the tape that is attached to the printer at four
locations at the front and back of the printer a, then
remove the protective sheet b .
b
2
Remove the following pieces of tape that are attached to the
printer (6 locations).
8
a
3
Open the output tray.
4
Remove the following pieces of tape that are attached to the
printer (2 locations).