Kit Assembly Process - Alpine X009-U Assembly Instruction Manual

Kit Assembly Process

Place the radio brackets on the radio and
1
note the positioning of the holes. The
larger slotted holes should be on the
bottom side of the radio as shown.
Assemble the radio and vehicle side
2
brackets using the supplied bracket screws
and washers. Tighten these bolts just
enough so that the brackets can be
repositioned if necessary.
Assembly Instructions
Bolt the assembled brackets to the radio
3
chassis using the supplied 8mm screws.
Note that the vehicle-side brackets allow
4
for easy radio position adjustment during
installation.
X009-U
5/6