Download Print this page
Alpine X009-RAM 9” Installation Manual
Alpine X009-RAM 9” Installation Manual

Alpine X009-RAM 9” Installation Manual

9” 2013 ram 1500; 2013 ram 2500; 2013 ram 3500

Advertisement

Quick Links

RAM
X009-RAM 9"
Installation Manual
˜ Model: Full Size Truck
˜ Model Year: 2013-UP
˜ Trim Level: All models without
8.4-Inch Touchscreen Display
* The specified vehicles have been tested and have met compatibility specs at the time of testing. Compatibility is
not guaranteed if the manufacturer has made production changes to the listed vehicles above.
Introduction
˜ Design and specifications are subject to change without notice for improvement.
To Ensure Safe Use, Always Follow These Precautions
˜ The installation of this product requires specialized skills and experience. We recommend that you have the
product installed by the store that you purchased it from.
˜ Before you use this product, be sure to carefully read this installation manual and the separate user's manual
so that you can use the product correctly. Alpine Electronics bears no responsibility for problems that arise as
a result of failure to follow the instructions in the manuals.
˜ This manual includes a number of symbols that are intended to help you use the product safely, to prevent
harm to you and others, and to protect against damage to property. These symbols and their meanings are
listed below. Make sure you fully understand these symbols before you begin reading the main text.
Explanations of Injury and Damage That May Result from Incorrect Use
Ignoring the content marked by this indication and using the product incorrectly is
Warning
expected to lead to death or serious injury.
Ignoring the content marked by this indication and using the product incorrectly is only
Caution
expected to lead to injury or property damage.
Model
RAM 1500
DODGE
RAM 2500
RAM 3500
FULL SIZE TRUCK
Year
2013 - UP
2013 - UP
2013 - UP
RAM
˜ 1/13

Advertisement

loading
Need help?

Need help?

Do you have a question about the X009-RAM 9” and is the answer not in the manual?

Questions and answers

Summary of Contents for Alpine X009-RAM 9”

  • Page 1 ˜ Before you use this product, be sure to carefully read this installation manual and the separate user's manual so that you can use the product correctly. Alpine Electronics bears no responsibility for problems that arise as a result of failure to follow the instructions in the manuals.
  • Page 2 FULL SIZE TRUCK ˜ 2/13 Types of Precautions Indicates actions that are forbidden Indicates actions that are (must not be performed) mandatory (must be performed) Forbidden Mandatory Indicates that disassembly is Marks content that should receive forbidden. your full attention. Forbidden Warning Do not disassemble or modify the product.
  • Page 3 FULL SIZE TRUCK ˜ 3/13 When installing and grounding the product, do not use any of the bolts or nuts of the steering wheel, brakes, fuel tank, or the like. Doing so could make the brakes stop working or lead to fire. Forbidden Do not install the product near the passenger-side airbag.
  • Page 4: Accessory List

    X009 Head Unit X009 Camera Harness AUX/Pre Out Harness GPS Antenna USB Extension Cable 8mm x 8 Screws Quick Reference Guides Registration Cards Alpine NAVTEQ Audio Navigation Registration Card Registration Card iDatalink Maestro Box Parts (ALP-MRR V2.0/ALP-HRN-RAM V2.0) Main Harness...
  • Page 5 FULL SIZE TRUCK ˜ 5/13 Installation Kit Parts (G-KTX-009-RAM) X009-RAM Radio Dash Bezel Key Harness Headunit Mounting Plate Screws x 8 Side Mounting Brackets...
  • Page 6 FULL SIZE TRUCK ˜ 6/13 Component Locations Maestro Module Location GPS Antenna Head Unit BT Microphone Location GPS Antenna Location...
  • Page 7 FULL SIZE TRUCK ˜ 7/13 Factory Radio Removal Process Remove the rubber screw cover from the top of the Extract 13x Phillips screws from the radio panel and radio panel and extract 2x #20 Torx screws. remove the radio bezel. Extract 1x 9/32”...
  • Page 8 FULL SIZE TRUCK ˜ 8/13 Programing the iDatalink Maestro Module INSTALL THE WEBLINK PLUG-IN CONNECT YOUR MAESTRO MODULE Go to: Use the included USB cable to connect your Maestro module to your idatalinkmaestro.com/plugin and follow the installation steps. Review the System Requirements before installing. LOG INTO WEBLINK Go to: idatalinkmaestro.com/login.
  • Page 9: Installation Instructions

    FULL SIZE TRUCK ˜ 9/13 Installation Instructions Using a cutting tool cut the bottom section of the Trim the shaded area using a cutting tool. metal bracket (as shown in the shaded area). Trim the dashed area on the factory HVAC control unit and mount it on to the X009-RAM Radio/Dash bezel.
  • Page 10 FULL SIZE TRUCK ˜ 10/13 Installation Instructions Connect the main harness and adapters to the factory harness. Place the GPS antenna in between the vent duct and the top of the dash. Use the supplied metal base for the best signal strength.
  • Page 11 FULL SIZE TRUCK ˜ 11/13 Exploded-View Diagram Dash board X009 Head Unit (Not included) Factory Dash Trim Side MOunting Bracket Factory HVAC Control Unit (Not included) X009-RAM Radio/Dash Bezel...
  • Page 12 FULL SIZE TRUCK ˜ 12/13 USB/AUX PCB Replacement Process Remove the cup holder cover by pulling straight up. Extract the 2x Phillips screws, remove the plastic base and illumination port cover. Detach the fabric by pulling the vinyl tubing and lift Mount the new PCB board using the factory screws the foam to access the bottom module tabs.
  • Page 13 FULL SIZE TRUCK ˜ 13/13 KTX-RAM Wiring Diagram To Vehicle Connectors USB Extension iDatalink MAESTRO Module Cable GPS Antenna HDMI Input X009 Head Unit To SXM (NOt included) To X009-GM Key Panel X009 Camera Harness 3.5mm Aux 3 /iPod Video Factory Rearview Camera 3.5mm iDatalink Audio...