Filter Box Disassembly - Sanyo PLC-XP100L Service Manual

Mechanical Disassembly

9-2 Filter box disassembly-2

1 Remove  screws E (T3x8) and take the filter cover off.
 Take the filter cover latch off by pulling it.
3 Remove 3 screws F (T3x8) and take the filter bottom cover
off.
4 Take the filter switch board off, and remove 1 screw G and
take the filter round sensor board off.
5 Remove  screws H (T4x8) and filter motor off.
Filter shaft
Filter round
sensor board
Filter bottom
cover
e
holder
G
F
H
H
Filter switch
board
Filter motor
F
F
-6-
e
Latch