Filter Holder Ass'y Removal; Filter Holder Disassembly - Sanyo PLV-WF20 Service Manual

Mechanical Disassembly

5 Filter holder ass'y removal

1 Pull the filter cartridge upward off.
 Remove 4 screws-A (T4x10) and 1 screw-B(M4x10), and then remove the filter holder
ass'y upward off.

5-1 Filter holder disassembly

1 Remove 1 screw-A (T3x14) and remove the wind sensor (S901).
 Remove  screws-B (T3x8) and remove the filter switch board.
3 Remove 3 screws-C (T3x8) and remove the filter motor ass'y.
Filter switch board
A
A
A
A
B
c
c
c
B
B
-7-
Filter cartridge
Filter holder ass'y
Filter holder
Filter motor ass'y
Wind sensor (S901)
A