Quick Start Guide
Installation
Overview
Linking button.
Press to enter
linking mode
'On' LED. When
illuminated
boiler is on.
'O ' LED. When
illuminated
boiler is o .
IMPORTANT: All LightwaveRF products can be legally DIY installed in your
own home; however, if in doubt, always consult a qualified electrician or
heating engineer. It is important to install this product in accordance with
the following instructions. Failure to do so may void your warranty.
Front view
Boost button.
Temporarily
turns on boiler.
Standby button.
Turns boiler
on/o