Adjust Your Boiler Settings - Light Wave JSJSLW920 Instruction Manual

Quick Start Guide
Installation

Adjust your boiler settings

For complete
important to ensure that it is the
only LightwaveRF Boiler Switch
that manages the on/o
your boiler, and that it cannot be
overridden
thermostatic control or separate
mode of operation.
If your boiler has an internal timer
or clock, ensure that it is switched
to 'Always ON' or, alternatively,
disabled. If there is an internal
thermostat for heating, make sure
that this is set to 'Maximum'.
Please refer to your specific boiler
manual to see how this is done.
control, it is
status of
by another
Set to 'always on' and disable the
clock
Set to heating internal thermostat to max.
Leaved switched on