The Standby Button - Light Wave JSJSLW920 Instruction Manual

Manual Operation

The Standby button

Standby button
If not connected to a Home Thermostat,
pressing the Standby button on the Boiler
Switch toggles the Boiler on and o . Once the
Boiler Switch is linked to a Home Thermostat,
pressing Standby will toggle between the set
'on' and 'setback' temperatures stipulated by
this device (see Home Thermostat and App
instructions to learn how to do this).
When connected to a Home Thermostat, if the heating is on, pressing the
Standby button overrides the current schedule and turns o
the heating
(activates setback temperature) until the next scheduled 'on period'. If the
heating is o , pressing the Standby button will turn the heating on
(activates on temperature) until the next 'o period'.
Holding the Standby button for a couple of seconds activates 'Away
mode'. Away mode also reverts to a pre-set setback temperature; however,
rather than returning to the schedule at the next on/o period, the mode
will continue to remain active until it is manually cancelled by pressing the
Standby button. The Standby setback temperature and Away mode
temperature is also stipulated by what is set on the Thermostat. These
functions can also be carried out on the App.