Advanced Chipset Settings - Viglen CX135 User Manual

Parallel Port Address
This option specifies the I/O address used by the parallel port. Select Disabled to
prevent the parallel port from accessing any system resources. When the value of
this option is set to Disabled, the printer port becomes unavailable. Select 378 to
allow the parallel port to use 378 as its I/O port address. The majority of parallel
ports on computer systems use IRQ7 and I/O Port 378H as the standard setting.
Select 278 to allow the parallel port to use 278 as its I/O port address. Select 3BC to
allow the parallel port to use 3BC as its I/O port address.
Parallel Port Mode
Specify the parallel port mode. The options are Normal, Bi-directional, EPP
and ECP.
Parallel Port IRQ
Select the IRQ (interrupt request) for the parallel port. The options are IRQ5
and IRQ7.

Advanced Chipset Settings

This item allows the user to configure the Advanced Chipset settings for the system.
NorthBridge Configuration
This feature allows the user to configure the settings for Intel Lindenhurst
NorthBridge chipset.
Memory Remap Feature
Select Enabled to allow remapping of overlapped PCI memory above the total
physical memory. The options are Enabled and Disabled.
Memory Mirroring/Sparing
This feature allows the user to enable the function of Memory Mirroring and
Sparing if memory configuration supports this function the options are
Disabled and Sparing.
SouthBridge Configuration
This feature allows the user to configure the settings for Intel ICH SouthBridge
chipset.
CPU B.I.S.T. Enable
Select Enabled to enable the function of CPU Built In Self Test. The options are
Enabled and Disabled.
Viglen CX135 User Guide – Version 1.0
62