General Information For Basic Connections - Panasonic DMR-BCT940 Operating Instructions Manual

Getting started
Connection
General information for Basic
connections
To connect and register the USB HDD
(optional)
Refer to "Registering the external HDD
(USB HDD)". ( 82)
About HDMI cable
Use the High Speed HDMI cables.
Non-HDMI-compliant cables cannot be utilized.
It is recommended that you use Panasonic's
HDMI cable.
When outputting 1080p signal or 24p(4K) signal,
please use HDMI Cables 5.0 meters or less.
When the unit is not to be used for a long
time
To save power, unplug it from the household
mains socket. This unit consumes a small
amount of power, even when the unit is in
standby mode.
[BCT940]
[approx. 0.2 W ("Quick Start" is not activated
and "RF OUT ( Aerial Signal )" is set to
"Off")]
[BST940]
[approx. 0.2 W ("Quick Start" is not
activated)]
18
SQT0292
• This unit cannot connect the TV that does not have the
HDMI terminal.
• The HDMI connection supports VIERA Link "HDAVI
Control" ( 84).
• You cannot connect this unit to DVI devices that are
incompatible with HDCP.
Depending on the device, images may not display properly
or at all when connecting with a DVI/HDMI switching cable.
(Audio cannot be output.)
• If you are connecting to a TV that is only compatible with
2 channel audio output, audio with 3 channels or more will
be down mixed and output as 2 channels, even if
connecting with an HDMI cable. (Some discs cannot be
down mixed.)
• [BCT940]
Keep the RF coaxial cables as far away as possible from
other cables.
Connect the Set Top Box or video equipment
Set Top Box or video equipment
A 21-pin Adaptor is required for
§
AUDIO/VIDEO terminal.
21-pin Scart cable
§
AV