Connection; Basic Connections - Panasonic DMR-PWT520 Operating Instructions Manual

Connection

Basic connections

3D programmes can be played back when this unit is connected to a 3D compatible TV.
• Before connection, turn off all equipment and read the appropriate operating instructions.
Cooling fan
AC mains lead
(supplied)
• Connect only after all other
connections are complete.
Household mains socket
(AC 220 to 240 V, 50 Hz)
If the TV does not have the HDMI terminal
Connect the TV with the Audio/Video cable. (
To connect and register the USB HDD (optional)
Refer to "Registering the external HDD (USB HDD)". (
To connect the Communication Camera (optional)
Refer to "VIERA Connect (Enjoying Internet Service)". (
About HDMI cable
• Use the High Speed HDMI cables. Non-HDMI-compliant cables cannot be utilized.
• When outputting 1080p signal, please use HDMI Cables 5.0 meters or less.
• Recommended Panasonic HDMI cable part number:
RP-CDHS15 (1.5 m), RP-CDHS30 (3.0 m), RP-CDHS50 (5.0 m), etc.
To the aerial
Aerial cable
HDMI cable
14)
62)
65)
RF coaxial cable
(supplied)
This unit's rear panel
VHF/UHF
HDMI
RF IN
Getting started
TV
13
VQT4C70