Panasonic DMR-BCT940 Operating Instructions Manual page 24

Getting started
Settings
8
Set Quick Start to "On", "Off" or "Timer
Setting for Quick Start", then press [OK].
• On
It is possible to start quickly from standby
mode.
• Off
Power consumption in standby mode is
minimized. ( 118)
However, startup time from standby mode
will be longer.
• Timer Setting for Quick Start
"Quick Start" is activated when the set time
comes.
9
Select the item to match the type of TV
connected.
For details, refer to "TV Aspect". (
When "Easy Setting has been completed."
appears, Easy Setting is complete.
• Select "Yes" to proceed to "Easy Network
Setting". ( 26)
• Select "No" to finish the Easy Setting.
24
SQT0292
To stop partway
Press [RETURN
To restart setup or change TV signal type
1 Press [FUNCTION MENU]. (
2 Select "Basic Settings" in "Setup", then press
[OK].
3 Select "Auto Setup" in "DVB Tuning", then
press [OK].
4 Select "Yes", then press [OK].
• If you are asked to select the auto setup
method, refer to "Auto Setup". (
To confirm that channels have been tuned
correctly
Refer to "Using Channel List". (
98)
• If tuning is cancelled partway through, it may not be
possible to receive the channels. Restart setup again.
].
22)
89)
30)