Connection; Basic Connections - Panasonic DMR-BWT955 Operating Instructions Manual

Getting started

Connection

3D programmes or 4K images can be played back when this unit is connected to a 3D or 4K
compatible TV.
• Before connection, turn off all equipment and read the appropriate operating instructions.
• To enjoy 4K output, you need to connect this unit to a 4K compatible TV.
• When outputting 1080p or 24p (4K) signal, please use HDMI cables 5.0 meters or less.
It is recommended that you use Panasonic's HDMI cable.
• In case problems occur for the playback of content such as no picture or picture distortion, check the
HDMI cable, related connections and the compatibility of TV video input.
To output images in 4K, connect the HDMI cable to a 4K compatible terminal of the connected
device.

Basic connections

Cooling fan
RF coaxial cable
(supplied)
AC mains lead
(supplied)
• Connect only after all other
connections are complete.
Household mains socket
(AC 220 to 240 V, 50 Hz)
• This unit cannot connect the TV that does not have the HDMI terminal.
• Keep the RF coaxial cables as far away as possible from other cables.
• The HDMI connection supports VIERA Link (
• You cannot connect this unit to DVI devices that are incompatible with HDCP.
Depending on the device, images may not display properly or at all when connecting with a DVI/HDMI switching cable. (Audio
cannot be output.)
• If you are connecting to a TV that is only compatible with 2 channel audio output, audio with 3 channels or more will be down
mixed and output as 2 channels, even if connecting with an HDMI cable. (Some discs cannot be down mixed.)
16
SQT0801
To the aerial
Aerial cable
94).
HDMI cable
(supplied)
VHF/UHF
HDMI
RF IN
TV's rear panel
This unit's rear panel