When You Experience Problems With Easy Network Setting - Panasonic DMR-BCT940 Operating Instructions Manual

When you experience problems with
Easy Network Setting
If there is any problem, the following message is
displayed on the screen.
Wireless Settings
Display
A conflict with • Please wait a few moments,
other devices and then try again.
occurred.
A time out error • Setting of the Wireless router
occurred. for MAC Address etc.
• The signal may be weak.
• The SSID and the encryption
key of the Wireless router.
• Please wait a few moments,
An
and then try again.
authentication
error or a time
out error
occurred.
A device error • If the problem is not solved,
occurred. consult your dealer.
Easy Network Setting ( Home Network
Connection Check )
Display
1. LAN cable
connection or "Fail"
Wireless setting:
2. IP address
"Fail"
setting:
3. Connection to
"Fail"
gateway:
Check the following
Check the
following
• Connection
of the LAN
cables
( 21)
• Settings of
the hub and
router
Display
1. LAN cable
connection or "Pass"
Wireless setting:
2. IP address
"Fail"
setting:
3. Connection to
"Fail"
gateway:
1. LAN cable
connection or "Pass"
Wireless setting:
2. IP address
"Pass"
setting:
3. Connection to
"Fail"
gateway:
1. LAN cable
connection or "Pass"
Wireless setting:
2. IP address "Home
setting: network
available"
3. Connection to
"Fail"
gateway:
Easy Network Setting ( Internet Connection
Test )
Display
Cannot find the • "Primary DNS" and
server. (B019) "Secondary DNS" settings
of "IP Address / DNS
Settings" (
No connection • The server may be busy or
could be made to the service may have been
the server. (B020) suspended. Please wait a
few moments, and then try
again.
• Settings of "Proxy Server
Settings" (
the router.
Troubleshooting
Check the
following
• Connection
and settings
of the hub
and router
• Settings of
"IP Address /
DNS
Settings"
( 87, 100)
Check the following
87, 100)
87, 100) and
117
SQT0292