Rear Camera; Others - Clarion NX503E Owner's Manual

The error screen is displayed in the
Smartphone linking screen after an
outgoing call is made.
The error screen is displayed while the
application is in use.
The Smartphone linking that could
previously be used can no longer be used.
The smartphone appears not to be
operating.

Rear camera

Symptom
Camera image is not displayed.
Camera image is poor.
The guidelines of the rear camera are not
displayed.
In some versions of the smartphone OS,
Smartphone linking is sometimes canceled
after an outgoing call is made.
Start up Smart Access from the Home screen
by operating on the smartphone.
Use the smartphone in a place with good
reception.
Check to see if the smartphone is turned
on. Also, cancel the sleep state on the
smartphone.
Disconnect the connector cable and
reconnect it. Or, turn the smartphone off then
back on again.
Remedy
Check to see if the select lever is at the R
position.
The screen may be difficult to view in bright
or dark locations, however this is not a
malfunction.
Lightly wipe the front lens cover, for example,
with a soft cloth moistened with water.
Touch the screen with the vehicle in a stopped
state, and touch Guideline Display .
Symptom
The screen is difficult to view just after the
power is turned on.
The screen is not displayed.
The screen flickers.
The screen grows dark (or is partially dark
or disappears while navigation is in use.
Buttons sometimes do not react
immediately after the unit is started up.
The menu cannot be operated.

Others

Remedy
This is due to the properties of the LCD panel,
and is not a malfunction. Please wait.
When the screen is hidden, it can be
redisplayed by pressing the rotary volume key
(NX503E) or the POWER (FX503E).  P.11
The fuse might be blown. Consult with your
dealer.
Use electrical components (cellphones,
wireless radios, minus ion generators, etc.)
that generate electrical noise as far away from
the unit as possible. Refrain from using these
components when the unit might be adversely
influenced even when they are used far away.
Stop the vehicle at a safe location, turn the
engine key to the "OFF" position and then to
the "ACC" or "ON" position. If this does not
rectify the problem, a probable cause might
be an LCD backlight malfunction or erroneous
operation of the unit. Consult with your dealer.
Wait a while before retrying the operation.
Stop the vehicle in a safe place and apply the
parking brake.
NX503E/FX503E 43