Clarion NX503E Owner's Manual page 55

5. INSTALLING THE MAIN UNIT
This unit is designed for fixed installation in
the dashboard.
● When installing the main unit in NISSAN
vehicles, use the parts attached to
the unit and follow the instructions in
Figure 3.
When installing the main unit in TOYOTA
vehicles, use the parts attached to the
vehicle and follow the instructions in
Figure 4.
P.56
● Wire as shown in Section 9. 
● Reassemble and secure the unit in the
dashboard and set the face panel and
center panel.
■ Mounting Screw Holes (Side View
of the Main Unit)
For NISSAN vehicle
For TOYOTA vehicle
Installing the Main Unit in a NISSAN Vehicle
Main Unit
Mounting bracket
(1 pair for the left and right sides)
Figure 3
6-Spacer (thickness: 1 mm)
6-Flat head screw
(M5 x 8)
(attached to the main unit)
NX503E/FX503E 53