Playing Ipod Models - Clarion NX503E Owner's Manual

Attention
• Be sure to remove the iPod after the
vehicle's engine key is turned to the
"OFF" position. The power of iPod supply
might run down if it is not turned off while
still connected to the unit.
Notice
• iPad/iPad2 are not supported.
• Not all iPod operations are guaranteed.
• When connecting an iPod to the unit,
do not use iPod headphones or other
accessories.
• The iPod might not operate correctly when
the iPod model's track repeat function is
set.
• The iPod might not operate correctly
when the iPod model's shuffle function
is set. In this case, cancel the shuffle
function before using the iPod.
• The iPod sometimes is not recognized
when only video files are saved to it. This
problem is resolved when even one music
file is saved.
• When there are lots of tunes to play,
the titles or list sometimes cannot be
displayed depending on the iPod model.
• Audio sometimes is not output in the iPod
mode when Bluetooth Audio is playing or
hands free calls are being made while the
iPod touch or iPhone is still connected
via Bluetooth. Perform operations from
the iPod touch or iPhone main unit,
and switch the settings (audio output)
from Bluetooth (CAR-BT) to the Dock
connector. Also, remove the iPod from
the unit and reconnect it. For details, refer
to the User's Manual for the connected
device.
• Audio is sometimes not output from
the USB-connected iPod touch or
iPhone if the audio device is connected
via Bluetooth. In this case, switch the
Bluetooth connection mode to other than
[Music Only] / [Hands Free + Music], and
reconnect iPod touch or iPhone. P.38

MEMO
• When iPod operation is stopped,
operations sometimes become possible
by selecting a tune or video from the
category list.
• If an error message is displayed, remove
the iPod from the unit and reconnect it.
• If the iPod becomes inoperable, reset the
iPod main unit and reconnect it.
Reset methods (examples)
- iPod:
Simultaneously hold down the "Center"
and "Menu" buttons until the Apple
logo is displayed.
- iPod touch:
Simultaneously hold down the "Sleep/
Cancel sleep" and "home" buttons until
the Apple logo is displayed.
For details on how to reset the iPod,
check in the User's Manual for the iPod.
✽ If operation is not remedied by resetting
and reconnecting the iPod, reset the
iPod, check operation of the iPod in
an unconnected state and then try
connecting it again.

Playing iPod models

Audio data and video images in connected
iPod models can be enjoyed on the unit.
Attention
• While you are driving, do not operate the
iPod main unit.
• Do not leave an iPod inside the vehicle.
The inside of the vehicle gets hot under
the blazing sun, for example, and might
cause them to malfunction.
• Do not get onto or place objects on iPod
models while they are connected. Doing
so might cause them to malfunction.
• Place iPod models at a safe place before
starting to use them.
Notice
• You cannot operate from the iPod once it
is connected to the unit.
• While you are driving, available items are
limited.
MEMO
• If the iPod becomes inoperable, reset
it. For details on how to reset the iPod,
check in the User's Manual for the iPod.
• When an iPod that is playing an audio file
is connected to the unit, play continues
from the tune that is being played. When
a video-compatible iPod is connected to
the unit while video is being played, the
point in the video may differ depending on
the iPod. To watch video, select the video
file again.
NX503E/FX503E 21