Using The Rear Camera; Image In The Rear Camera; Displaying The Image In The Rear Camera - Clarion NX603 Quick Start Manual & Installation Manual

4 TOP MENU button
This displays the top menu screen of
DVD video.
5 MENU button
This displays the top menu screen of
DVD video.
direction button
6
This selects items in the DVD video
menu screen and top menu screen.
7 ENTER button
This determines items selected in the
DVD video menu screen and top menu
screen.
button
8 SOURCE
This switches the source of the audio
mode.
When the unit is turned off, this turns the
power on.
Keeping this button held down switches
the audio power supply on and off.
9 RETURN button
This returns you to the immediately
previous screen in the DVD video menu
screen and top menu screen.
✽ The 2ZONE function cannot be used
with the unit.
10 BAND button
This switches the tuner FM and AM
bands.
11 VOL button
This lowers the volume.
12 VOL button
This raises the volume.
13 button
With Radio/SiriusXM Satellite Radio:
Preset channel increment
Long press time:
Channel seek increment
When other audio sources are selected
Track/chapter increment, track/chapter
rewind
36 NX603/FX503
14 button
This pauses play of DVD video and DivX.
If this button is pressed during a pause,
play is resumed from the place where it
was stopped.
Long press time:
This resume stops DVD video and DivX.
If this button is long pressed during
a resume stop, play is completely
stopped.
button
15
With Radio/SiriusXM Satellite Radio:
Preset channel decrement
Long press time:
Channel seek decrement
When other audio sources are selected
Track/chapter decrement, track/chapter
fast forward
✽ 1 With DVDs, keys other than on the disc
menu cannot be operated on the remote
control. Touch the unit to operate them.
✽ 2 With DVDs, slow play during a pause is
possible by pressing .
✽
1
:

Using the rear camera

When the rear color camera (sold
separately) is connected to the unit, the rear
of the vehicle can be viewed on the monitor.
Consult your dealer before buying the rear
color camera (sold separately).
WARNING
Never reverse the vehicle while
viewing only the monitor screen. Be
sure to check the safety of the area
around the vehicle directly with your
eyes and drive at a slow speed.
Before adjusting the image quality
✽ ✽
1, 2
:
and adjusting, for example, the guide
display, be sure to stop the vehicle
at a safe place and then proceed
with these operations.
Notice
The range projected by the rear camera
is limited. Also, the guides displayed on
the rear camera screen sometimes differ
from the actual vehicle width and actual
distance between cars. (Guides are
straight lines.)
Use the image in the rear camera as an
aid for checking for obstructions, etc. The
quality of the projected image might get
worse when water droplets, etc. adhere to
the camera.
Be sure to adjust the guides to match the
car you are driving when the guides are
displayed.

Image in the rear camera

● Actual distances and the impression from
the image in the rear camera is different
since it uses a wide-angle lens.
● The image in the rear camera is a mirror
image. A "mirror image" is an image
obtained by inverting the left and right
of an image like in a rear mirror or side
mirror on a vehicle.
● The image in the rear camera cannot be
seen or is difficult to view at night or in
dark locations.
● The camera is in a drip-proof sealed
structure to prevent condensation on the
lens.
● Never loosen the screws on the camera
body or disassemble the camera. This
will impair the drip-proof performance
and cause malfunction, etc.
● Clear images cannot be obtained when
the lens front cover is dirty. When water
droplets, snow, mud, etc, is adhering to
the cover, wipe the cover clean with a
soft cloth, for example, moistened with
water. Wiping the lens cover firmly with a
dry cloth, for example, with dirt, etc. still
on the cover will sometimes scratch it.
Displaying the image in the
rear camera
Notice
The guides can be displayed and adjusted
only when the gear lever is at R (reverse).
1
Turn the engine key to the "ON"
position.
2
Set the gear lever to R (reverse).
The display switches to the image in
the rear camera.
Display priority is given to the image
in the rear camera even when audio-
related items are displayed.
Only volume adjustment
by the rotary volume key
(NX603) VOL+ , VOL- (FX503) can be
operated during camera display.