Electrical Connection - Heatscope Spot Original Installation And Instruction Manual

EN

13. Electrical connection

To ensure that the HEATSCOPE® is connected correctly, please observe the cross sections of the supplied con-
necting cable.
The following types of radiant heaters (serial number on the housing) are supplied with an open-ended 3-pole
cable with the following cross section:
MHS-SP1600BK.100, MHS-SP2200BK.100, MHS-SP2800BK.100, MHS-SP1600WT.100, MHS-SP2200WT.100, MHS-SP2800WT.100
MHS-VT1600BK.100, MHS-VT2200BK.100, MHS-VT3200BK.100, MHS-VT1600WT.100, MHS-VT2200WT.100, MHS-VT3200WT.100
SP- & VT-Models: On the heater the
„I" button has to be switched on!
N
PE
L1
0 %
L
POWER
100 %
L
POWER
O
I
PE
N
L
L1
L1
L1
L1