Setting The Time And Using The Timer; Setting The Current Time - Samsung LCD TV E-Manual

Setting the Time and Using the Timer

Setting the Current Time

MENU > System > Time
Set the clock manually or automatically. Once the clock has been set, you can select the virtual remote
panel's INFO to check the current time.
"
The clock must be reset every time the power is disconnected.
Setting the Clock using Digital Broadcast Info
MENU > System > Time
Set Clock Mode to Auto. The TV automatically downloads the correct time from a digital channel. To
enable this option, the TV's Antenna jack must be connected to either an antenna or a cable output
and must be receiving digital broadcasts. The accuracy of the time information received may vary
depending on the channel and signal. If your TV is connected to a set-top-box or satellite box using
HDMI or Component connections, you must set the time manually.
If the Clock is Wrong in Auto Mode...
MENU > System > Time
If the time set automatically is incorrect, you can offset the clock in 1-hour increments by as much as
-/+ 12 hours. Select
"
Time Offset adjusts the time through a network connections and is only available if the
to Auto and the TV is connected to the Internet though a local area network.
"
Time Offset will adjust the time if the TV fails to receive time information through normal digital broadcast
signals.
Setting the Clock Manually
Manually enter the time. Set
time and date.
Clock Set: Set the current
Time Zone: Select your time zone.
"
This function is only available when the
> Clock
Try Now
> Clock > Clock Mode
> Clock > Time Offset
System > Time > Clock
Clock Mode
Date and Time.
Try Now
Try Now
> Time Offset and offset the clock to the correct time.
to Manual and then select
Clock Mode is set to Auto.
Clock Mode
Clock Set to enter the current
is set