Controlling The Tv Using Motions (Motion Control); Testing Ambient Illumination Using The Tv Camera - Samsung LCD TV E-Manual

Controlling the TV using Motions (Motion Control)

MENU > System > Motion Control
It's possible to use motion commands to change channels, adjust the volume, and control the pointer
while searching the web using Smart Hub.
The motion control features require a separately-sold camera installed on the TV.
"
Please note, that not all apps support Motion Control.
"
Please read through the instructions before using Motion Control. For more information, refer to "Read
Before Using Voice, Motion, or Face Recognition".
[
When connecting the TV camera to 2014 Samsung TV models, make sure to connect it to the
specified USB port of the TV. Other USB ports are not supported for this purpose.

Testing Ambient Illumination Using the TV Camera

MENU > System > Motion Control
Run this test before using Motion Control to ensure proper functionality.
11
Initiate the Motion Control Environment
the TV reflects light onto the screen, the motion may not be properly recognized by the TV.
21
Face the TV camera, and follow the onscreen instructions to raise your hand from a comfortable
position with the index finger spreading upwards, and move it left or right slowly. A pointer
appears on the screen when the TV recognizes the action. If the recognition fails, try again.
Checking Ambient Noise and Illumination (Motion Control Environment Check)
MENU > Support > Self Diagnosis
Navigate to Support
This function measures the ambient noise and illumination levels around the built-in camera of the TV
to check if they are suitable for motion control use.
Try Now
> Motion Control Environment Test
> Motion Control Environment Check
> Self Diagnosis menu and select
Test, and select Start
Motion Control Environment
Try Now
1.5m to 3.5m away from the TV. If
Try Now
Check.