LCD TV user manual imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.com/global/register Model Serial No.
Page 3
• Watching the LCD TV in 4:3 format for a long period of time may leave traces of borders displayed on the left, right and center of the screen caused by the difference of light emission on the screen. Playing a DVD or a game console may cause a similar effect to the screen.
Contents ConneCting and PreParing Your tV Setting the PC List of Parts ................2 Setting up Your PC Software (Based on Windows XP) ..28 Viewing the Control Panel ............3 Display Modes ..............28 Viewing the Connection Panel ..........4 Setting up the TV with your PC ..........29 ...
Parts Please make sure the following items are included with your LCD TV. If any items are missing, contact your dealer. Remote Control & Batteries Mini Remote Control (2ea) & Cleaning Cloth Power Cord (AA X 2ea) Batteries(3Vx2ea)
The product colour and shape may vary depending on the model. 1 logo You can configure the ARMANI and SAMSUNG logo lights at the bottom of the TV as required. 2 remote Control SenSor Aim the remote control towards this spot on the TV.
Viewing the Connection Panel [Side Panel Jacks] Power Input The product colour and shape may vary depending on the model. ➣ Whenever you connect an external device to your TV, make sure that power on the unit is turned off. ➣...
DVI In(hDmI) [r-auDIo-l] DVI audio outputs for external devices. ➣ Supported modes for HDMI/DVI and Component 480i 480p 576i 576p 720p 1080i 1080p HDMI/DVI 50Hz HDMI/DVI 60Hz Component 4 ant In To view television channels correctly, a signal must be received by the set from one of the following sources: An outdoor aerial / A cable television network / A satellite network 5 SerVICe Connector for SERVICE only.
! A lternately select Teletext, WISELINK and Anynet + . ( Double, or Mix. This remote can be used to control % Teletext sub page recording on Samsung recorders with the Anynet + feature) : Teletext next page & P : Teletext previous page $ Press to backlight the buttons on the remote.
mini remote Control mini remote Control is a simplified remote control that consists of the power, channel and volume buttons only. 1 Infrared - LED (Light emitting diode) ➣ Use the Mini Remote Control with the Infrared - LED (Light emitting diode) pointing towards the TV.
Installing batteries in the remote Control normal remote Control 1. Lift the cover at the back of the remote control upward as shown in the figure. . Install two AA size batteries. ➣ Make sure to match the "+" and "–" ends of the batteries with the diagram inside the compartment.
Switching on and off the mains lead is attached to the rear of your set. 1. Plug the mains lead into an appropriate socket. . Press the PoWer button or the tV button on the remote control to turn the TV on. ➣...
Plug & Play When the tV is initially powered on, several basic settings proceed automatically and Plug & Play subsequently. the following settings are available. 1. Press the PoWer button on the remote control. The message "Start Plug & Play" is displayed with "OK" selected. Start Plug &...
Storing Channels automatically You can scan for the frequency ranges available to you (and availability depends on Channel your area). area : asia/W.europe automatically allocated programme numbers may not correspond to actual or auto Store desired programme numbers. however, you can sort numbers manually and clear any manual Store ...
Storing Channels manually You can store television channels, including those received via cable networks. Channel When storing channels manually, you can choose: area : asia/W.europe ♦ Whether or not to store each of the channels found. auto Store manual Store ...
adding / locking Channels using the Channel manager, you can conveniently lock or add channels. Channel area : asia/W.europe 1. Press the menu button to display the menu. auto Store Press the ▲ or ▼ button to select "Channel", then press the enter button.
Sorting the Stored Channels this operation allows you to change the programme numbers of the stored channels. Channel this operation may be necessary after using the auto store. area : asia/W.europe auto Store 1. Press the menu button to display the menu. manual Store ...
Fine tuning Channel reception use fine tuning to manually adjust a particular channel for optimal reception. Channel area : asia/W.europe 1. Use the number buttons to directly select the channel that you want to fine tune. auto Store manual Store .
Changing the Picture Standard You can select the type of picture which best corresponds to your viewing Picture equirements. mode : Standard backlight 1. Press the menu button to display the menu. Contrast brightness Press the enter button, to select "Picture". Sharpness .
Configuring Detailed Settings on the Picture You can set detailed picture settings. Picture mode : Standard 1. Press the menu button to display the menu. backlight Press the enter button, to select "Picture". Contrast brightness . Press the enter button to select “Mode”.
Configuring Picture Option 1. Press the menu button to display the menu. Picture more Press the enter button, to select "Picture". Picture options . Press the ▲ or ▼ button to select "Picture Options", then press the enter button. reset : oK ...
♦ hDmI black level: normal/low You can directly select the black level on the screen to adjust the screen depth. ➣ This function is active only when the external input connects to HDMI(RGB signals). ♦ 100hz motion Plus: off/low/medium/high/Demo Removes drag from fast scenes with a lot of movement to provide a clearer picture. ➣...
Viewing the Picture In Picture (PIP) You can display a sub picture within the main picture of set programme or video Setup input. In this way, you can watch the picture of set programme or video input from Plug & Play ...
Sound Features 1. Press the menu button to display the menu. Press the ▲ or ▼ button to select "Sound", Sound then press the enter button. mode : Custom equalizer . Select the required option by pressing the ▲ or ▼ button, then press the enter SrS tS Xt : off ...
Selecting the Sound mode You can set the sound mode in the "tools" menu. tools When you set to "Dual I-II", the current sound mode is displayed on the screen. anynet+ (hDmI-CeC) 1. Press the toolS button on the remote control. Picture mode Standard Sound mode...
Setting and Displaying the Current time You can set the tV’s clock so that the current time is displayed when you press the mode : Custom Setup InFo button. You must also set the time if you wish to use the automatic on/off equalizer ...
Switching the television on and off automatically 1. Press the menu button to display the menu. Setup Press the ▲ or ▼ button to select "Setup", then press the enter button. Plug & Play language : english . Press the ▲ or ▼ button to select "Time", then press the enter button.
melody / entertainment / energy Saving 1. Press the menu button to display the menu. mode : Custom Setup equalizer Press the ▲ or ▼ button to select "Setup", then press the enter button. Plug & Play SrS tS Xt : off ...
Setting the logo lighting You can configure the armanI and SamSung logo lights at the bottom of the tV as Setup required. Plug & Play language : english 1. Press the menu button to display the on-screen menu.
Selecting the Source You can select among external sources connected to your tV’s input jacks. mode : Custom Input equalizer Source list : tV SrS tS Xt : off 1. Press the menu button to display the menu. ...
Windows and your particular video card. even if your actual screens look different, the same, basic set-up information will apply in almost all cases. (If not, contact your computer manufacturer or Samsung Dealer.) 1. First, click on "Control Panel" on the Windows start menu.
Setting up the tV with your PC ➣ Press the SourCe button to select PC mode. Picture 1. Press the menu button to display the menu. mode : Standard backlight Press the enter button, to select "Picture". Contrast . Select the required option by pressing the ▲ or ▼ button, then press the enter brightness Sharpness button.
Bulk-Only Transport device. Examples of MSC are Thumb drives and Flash Card Readers (Both USB HDD and HUB are not supported.) Before connecting your device to the TV, please back up your files to prevent them from damage or loss of data. SAMSUNG is not responsible for any data file damage or data loss.
using the WISelInK menu 1. Press the menu button. Press the ▲ or ▼ button to select “Input”, then press the Input enter button. Source list : tV . Press the ▲ or ▼ button to select “WISELINK”, then press the enter button.
using the Photo (JPeg) list This menu shows JPEG files and folders saved on an USB memory device. 1. Complete Steps 1 to 3 of “Using the WISELINK Menu”. Photo (Refer to page 31) 861MB/994MBFree . Press the ◄ or ► button to move to “Photo”, then press the enter button.
Page 36
using the menu in the Photo list Start Slide Show: 1/10 Page You can start a Slide Show. Photo 580*440 47KB Select all: Jun 1,2008 3/23 Upper Folder Forder1 Photo 0001 Photo 0001 None Select all the files in the folder. File 4 File 5 File 6...
Page 37
using the option menu 1. Complete Steps 1 to 3 of “Using the WISELINK Menu”. (Refer to page 31) . Press the ◄ or ► button to move to “Photo”, then press the enter button. The saved file information is displayed as a folder or file.
using the mP list This menu shows MP3 files from among the files saved on a USB memory device. 1. Complete Steps 1 to 3 of “Using the WISELINK Menu”. (Refer to page 31) music . Press the ◄ or ► button to move to “Music”, then press the enter button.
using the Setup menu Setup displays the user settings of the WISELINK menu. 1. Complete Steps 1 to 3 of “Using the WISELINK Menu”. (Refer to page 31) . Press the ◄ or ► button to move to “Setup”, then press the enter button.
What is anynet+? anynet+ is an aV network system that enables an easy-to-use aV interface for users by controlling all connected aV devices through the anynet+ menu when Samsung electronics aV devices are connected. Connecting anynet+ Devices the anynet+ system supports aV devices supporting anynet+ only.
Setting up anynet+ the following settings are to use anynet+ functions. using the anynet+ Function tools anynet+ (hDmI-CeC) 1. Press The toolS button. Then Press the enter button to select "Anynet+(HDMI- Picture mode Standard CEC)". Sound mode Custom Sleep timer Press the ▲...
Scanning and Switching between anynet+ Devices 1. Press the toolS button. Then press the enter button to select "Anynet+(HDMI-CEC)". View tV . Press the ▲ or ▼ button to select "Select Device", then press the enter button. Select Device .
anynet+ menu the anynet+ menu changes depending on the type and status of the anynet+ devices connected to the tV. anynet+ menu Description View tV Switches from Anynet+ to TV broadcast mode. Select Device Your TV connects to the corresponding device. record Starts a recording.
listening through a receiver You can listen to sound through a receiver instead of the tV speaker. 1. Press the toolS button. Then Press the enter button to select "Anynet+(HDMI- CEC)". View tV Press the ▲ or ▼ button to select "Receiver", then press the enter button.
teletext Feature most television stations provide written information services via teletext. the index page of the teletext service gives you information on how to use the service. In addition, you can select various options to suit your requirements by using the remote control buttons.
Page 46
the teletext pages are organized according to six categories: Part Contents Selected page number. Broadcasting channel identity. Current page number or search indications. Date and time. Text. Status information. FASTEXT information. ➣ Teletext information is often divided between several pages displayed in sequence, which can be accessed by: ...
troubleshooting: before Contacting Service Personnel No sound or picture ♦ Check that the mains lead has been connected to a wall socket. ♦ Check the picture contrast and brightness settings. ♦ Check the volume. Normal picture but no sound ♦ Check the volume.
Technical and Environmental Specifications model name laa00 laa00 Screen Size (Diagonal) 46 inch 52 inch PC resolution 1920 x 1080 @ 60 Hz 1920 x 1080 @ 60 Hz Sound Output 10W X 2 10W X 2 Dimensions (WxDxh) With stand 1155 X 382 X 760 mm 1298 X 382 X 807 mm Weight...