dIXEL dIXEL dIXEL dIXEL Operating manual cod. 1592 cod. 1592017 cod. 1592 cod. 1592 017050 Dual temperature controller XLR470 XLR470 XLR470 XLR470 C C C C M M M M Operating Manual 1592017050 XLR470 GB r1.0 24.05.07.doc XLR470 1/18...
dIXEL dIXEL dIXEL dIXEL Operating manual cod. 1592 cod. 1592017 cod. 1592 cod. 1592 017050 C C C C M M M M XLR470 XLR470 XLR470 XLR470 INDICE 1. GENERAL WARNINGS_________________________________________________________ 3 2. GENERAL DESCRIPTION ______________________________________________________ 3 3. TEMPERATURE CONTROL_____________________________________________________ 3 4.
Fit the probe where it is not accessible by the End User. The instrument must not be opened. • In case of failure or faulty operation send the instrument back to the distributor or to “Dixell S.p.A.” (see address) with a detailed description of •...
dIXEL dIXEL dIXEL dIXEL Operating manual cod. 1592 cod. 1592017 cod. 1592 cod. 1592 017050 SECTION 2 For the section 2 two defrost modes are available through the “tdF2” parameter: tdF2= rE defrost with electrical heater tdF2= in or hot gas. The defrost interval is control by means of parameter “EdF2”: rtc (only for instruments with RTC): beginning of defrost cycles is set by the L2d1÷L2d6 parameters during the working days and S2d1÷S2d6 during the holidays...
dIXEL dIXEL dIXEL dIXEL Operating manual cod. 1592 cod. 1592017 cod. 1592 cod. 1592 017050 CONTROL OF EVAPORATOR FANS FOR SECTION 2 Section 2 has 1 relay to control evaporator fan (26-27) The fan control mode is selected by means of the “FnC2” parameter: FnC2=C-n fans will switch ON and OFF with the compressor 2and not run during defrost:;...
dIXEL dIXEL dIXEL dIXEL Operating manual cod. 1592 cod. 1592017 cod. 1592 cod. 1592 017050 To lock and unlock the keyboard. To enter the programming mode. To exit the programming mode. 1.4 MEANING OF THE ICONS ICON FUNCTION MEANING Celsius degree Fahrenheit degree Compressor 1 on FLASHING...
dIXEL dIXEL dIXEL dIXEL Operating manual cod. 1592 cod. 1592017 cod. 1592 cod. 1592 017050 1.9 HOW TO MOVE A PARAMETER FROM THE “PR2” MENU TO “PR1” AND VICE VERSA. Each parameter present in “Pr2” MENU can be removed or put into “Pr1”, user level, by pressing “SET1 + n n ”.
Page 8
dIXEL dIXEL dIXEL dIXEL Operating manual cod. 1592 cod. 1592017 cod. 1592 cod. 1592 017050 COF2 Compressor2 OFF time with faulty probe2: (0÷255 min) time during which the compressor is off in case of faulty thermostat probe. With COF=0 compressor2 is always active. Kind of action for section 2: CL = cooling;...
Page 9
dIXEL dIXEL dIXEL dIXEL Operating manual cod. 1592 cod. 1592017 cod. 1592 cod. 1592 017050 FnC2 Fan operating mode, section 2: C-n = running with the compressor 2, OFF during the defrost; C-y = running with the compressor 2, ON during the defrost;...
Page 10
dIXEL dIXEL dIXEL dIXEL Operating manual cod. 1592 cod. 1592017 cod. 1592 cod. 1592 017050 OP : the digital input is activated by opening the contact. Digital input 2 operating mode(2-3): configure the digital input function: MP1 = door switch 1; MP2 = door switch 2, MP: door switch (it’s used by both the sections); EA1 = generic alarm section 1; EA2 = generic alarm section 2;...
dIXEL dIXEL dIXEL dIXEL Operating manual cod. 1592 cod. 1592017 cod. 1592 cod. 1592 017050 DIGITAL INPUTS The instrument can support up to 2 free contact digital inputs. Both of them can be configured as One is always configured as door switch, the second is programmable in seven different configurations by the “I2F”...
dIXEL dIXEL dIXEL dIXEL Operating manual cod. 1592 cod. 1592017 cod. 1592 cod. 1592 017050 1.21 WALL MOUNTING Unscrew the 4 frontal screws (Fig. 1, A, B, F, G) and remove the cover (Fig. 1, C). Unscrew the 2 screws (Fig. 1, D, E) that keep connected the frontal and lower parts of Cool Mate and separate the 2 parts. Make the proper holes for cablepresses or pipepresses using the centres signed in the bottom cover of the Cool Mate, (Fig.
dIXEL dIXEL dIXEL dIXEL Operating manual cod. 1592 cod. 1592017 cod. 1592 cod. 1592 017050 1.25 HOW TO PROGRAM AN INSTRUMENT USING A HOT KEY (DOWNLOAD) Turn OFF the instrument. Insert a programmed “Hot Key” into the 5 PIN receptacle and then turn the Controller ON. Automatically the parameter list of the “Hot Key”...
Need help?
Do you have a question about the COOL MATE XLR470 and is the answer not in the manual?
Questions and answers