Pc Mode Menu System; Sound Menu; Feature Menu; Pc Picture Menu - Sanyo CE32LD81-B Instruction Manual

PC Mode Menu System

See "Connecting the LCD TV to a PC" section
for connecting a PC to the TV set.
For switching to PC source, press "AV" button
on your remote control and select PC input.
You can also use "Source" menu to switch to
PC mode.
Note that PC mode menu settings are
available only while the TV is in PC source.

Sound Menu

The items in this menu are described at
"Sound Menu" section explained in
"Analogue TV Menu System".

Feature Menu

Feature menu settings are identical to the
settings explained in "Feature Menu" section
in "Analogue TV Menu System".

PC Picture Menu

For adjusting PC picture items, do the
following:
Press / button to select the second icon.
PC Picture menu appears on the screen.
Brightness, Contrast
Temperature settings in this menu are
identical to settings defined in TV picture
menu under "Analogue TV Menu System".

PC Position Menu

Select the sixth icon by pressing
PC Position menu appears on the screen:

Autoposition

If you shift the picture horizontally or vertically
to an unwanted position, use this item to put
the picture into correct place automatically.
This setting therefore automatically optimizes
the display.
Select Autoposition item by using
buttons. Press OK button.
Warning: Please ensure auto adjustment is

H (Horizontal) Position

and Colour
This item shifts the image horizontally to right
hand side or left hand side of the screen.
Select H Position item by using
Use
V (Vertical) Position
/ button.
This item shifts the image vertically towards
the top or bottom of the screen.
Select V Position item by using
Use
English - 39 -
PC POSITION
Autoposition
H Position
V Position
Phase
Dot Clock
performed with a full screen image
to ensure best results.
/ button to adjust the value.
/ button to adjust the value.
or
or button.
or button.