Aps (Auto Programming System); Country; Program; Band - Sanyo CE32LD81-B Instruction Manual

APS (Auto Programming System)

When you press the BLUE button for starting
automatic tuning, Auto Programming System
menu will appear on the screen:

Auto Program

Country

All Prestored Programs
will be deleted
UK
Country
Press or button to select your country. If
you want to exit from A.P.S. function, press the
BLUE button.
When you press OK or RED button for starting
automatic tuning, all stored programmes will
be erased and the TV will search for available
channels. During the search, the following
OSD will be displayed:
APS is running...
UK
P 03 - C 04
Whenever you press the BLUE button, APS
function stops and Program Table appears
on the screen.
WARNING!
Ok
Cancel
63.75 MHz
6%
63.75 MHz
Cancel
If you wait until the end of APS, Program Table
will be displayed with the programmes found
and located.

Program

Press or
/ button to select the program number. .
You can also enter a number using the
numeric buttons on the remote control. There
are 100 programme storage between 0 and
99.

Band

Band can be selected either C or S. Press
/ button to select Band.

Channel

Channel can be changed by
numeric buttons.

Colour System

Press or
Use /
to PAL, SECAM or AUTO.
If sound system is set to I (the UK setting),
SECAM will not be available for the colour
system settings.
Note:In AV modes, you can choose NTSC
3.58, NTSC 4.43 or PAL60 as well.

Sound System

Press or
Press /
system to BG,DK, L or L'.

Fine Tune

Press or
/ button to adjust the tuning.

Search

Press or
/ button to start programme searching. You
can also enter the desired frequency using the
numeric buttons while Search item is
highlighted.
English - 37 -
button to select Program. Use
button to select Colour System.
button to change the colour system
button to select Sound System.
button to change the sound
button to select Fine Tune. Press
button to select Search. Use
/ button or