On-Screen Service Menu System - Sanyo LCD-32XH3 Service Manual

On-screen Service Menu System

General
This set has an On-screen Service Menu System included in the CPU that allows remote operation for most of the
service adjustments.
On-screen Service Menu System
Quick operation is needed to enter Service Mode.
How to enter the Service Menu
1.
Press and hold the MENU button on top controls.
2.
Keep pressing the MENU button and press the MUTE button on the remote control, and the service mode menu will
be displayed.
MENU VIDEO MODE
MENU
Item No.
[ Service Mode Menu ]
INDEX 1 CTI DELAY-TVPAL-N
IC TVP15147
ADDR 2D
DATA 00 00000000
Data Value
Sub Address of IC
How to select the service item and adjust data:
To select service item
1) Select "INDEX" line and press + or - button.
CH
CH
SERVICE
INDEX 2 CTI DELAY-VideoPAL-N
IC TVP15147
ADDR 2D
DATA 00 00000000
To exit service mode
To exit service mode, turn the TV off by pressing the POWER ON/OFF button on the top controls
or remote control.
Note: The all adjusted data in service mode will be memorized into EEPROM automatically.
+
VOLUME
Item Name
SERVICE 0.14 00
Target IC
2.06 00
VIDEO MODE
RECALL DISPLAY MUTE AUDIO MODE
To adjust data:
1) Select "DATA" line by pressing
CH
CH
SERVICE
INDEX 2 CTI DELAY-VideoPAL-N
IC TVP15147
ADDR 2D
DATA 00 00000000
2) Press + or - button to adjust data.
-17-
POWER
or button.
2.06 00