On-Screen Service Menu System - Sanyo LCD-42XF4 Service Manual

On-screen Service Menu System

General
This set has an On-screen Service Menu System included in the CPU that allows remote operation for most of the
service adjustments.
On-screen Service Menu System
Quick operation is needed to enter Service Mode.
How to enter the Service Menu
1.
Press and hold the MENU button on Side Controls.
2.
Keep pressing the MENU button and press the MUTE button on the remote control, and the FACTORY MENU
will be displayed.
3.
Select SERVICE by pressing
Side Controls
MENU button
Open or close the On-Screen Menu.
[ Service Mode Menu ]
SERVICE
INDEX-007 575P SUB- COLOR
ADDR. 09AB
DATA 00 00000000
How to select the service item and adjust data:
To adjust data:
1) Select "DATA" line by pressing
SERVICE
INDEX-007 575P SUB- COLOR
ADDR. 09AB
DATA 00 00000000
2) Press + or - button to adjust data.
To exit service mode
Press BACK button or MENU button to exit service mode.
Note: The all adjusted data in service mode will be memorized into EEPROM automatically.
or button and then press + or - button to enter SERVICE menu.
Item Name
Address
Data Value
or button.
-9-
VIDEO MODE POWER
RECALL DISPLAY MUTE AUDIO MODE
SLEEP
ECO PIP CHANGE MAIN/SUB
IMAGE
BACK
CH
VIDEO MODE POWER
RECALL DISPLAY MUTE AUDIO MODE
CH
ZOOM SURROUND BASS SOUND
SLEEP
ECO
PIP CHANGE MAIN/SUB
IMAGE
BACK
CH
CH
ZOOM SURROUND BASS SOUND