Before Operating; Volume Adjustment; Mute Button - LG FFH-515A Owner's Manual

BEFORE OPERATING

Volume Adjustment

Turn VOLUME clockwise to increase the sound level,
or counterclockwise to decrease it.
If you turn the volume up more than maximum level,
the volume level flashes in the display.
(Or press VOLUME + or - button on the remote
commander.)
Sound Quality Adjustment
MDSS (Multi Dynamic Sound System)
Press the MDSS button to reinforce treble (Hi-
Tone), bass (UBB : Ultra Bass Booster), and
surround effect.
The MDSS indicator lights up.
To cancel it press the MDSS button again.
To reinforce bass and treble
Press the UBB/Hi-TONE button to set the UBB/HI-
TONE mode.
Each time UBB/HI-TONE button is pressed, it
changes as follows
UBB ON
UBB OFF
MDSS OFF
To activate stereo sound (on remote control)
You can choose
impressions : select a desired sound mode by
using the EQ PATTERN button.
Press the EQ PATTERN button once to see the
current sound mode scrolled on the display.
Press the EQ PATTERN button repeatedly, until the
desired sound mode is scrolled on the display.
FLAT : linear frequency response
POP : less bass, less treble
ROCK : more bass, more treble
CLASSIC : for orchestral music
VOCAL : puts an emphasis on the vocal
sound.
JAZZ : feels like a jazz club. It effectively
creates the flavour of harmony and
mood.
For personal listening
Connect headphone to headphone socket.
No sound comes from the speakers.
HI-TONE ON
HI-TONE OFF
between 6 fixed sound

MUTE button

(on remote control)
Press this button to mute your unit.
You can mute your unit in order, for example, to
answer the telephone.
The MUTE indicator appears on the display.
DISPLAY MODE button
(on remote control)
Whenever you press the DISPLAY MODE button,
you can enjoy the spectrum change with 10 types in
the display.
MODE/RIF
(Radio Interference Filter) button
To switch from mono to stereo reception and vice
versa. If the power of transmission is too weak to
receive stereo FM without interference, switch the
STEREO off.
When a MW(AM), or LW broadcasting is being
recorded, the R.I.F.(BEAT-SWITCH) button can be
used to reduce unwanted ÒbeatÓ signals and noise,
which were not heard before recording.
DEMO button
(In case of Auto Stop Deck)
Press this button in power on or off state to
demonstrate the function in the display. To cancel it,
press the POWER button or DEMO button. During
the demostration the POWER button, DEMO button
and VOLUME are operated only.
NOTE : In case of Auto Reverse Deck
Press PLAY MODE button in power-off state to
demonstrate for the function in the display. To cancel
it, press the POWER button or PLAY MODE button.
10