Table of Contents
Advertisement
TIMER
(8) Program the time to switch off in the
same way as the time to turn on.
(9) Set the volume level by pressing PRESET
DOWN or UP (or turning the JOG DIAL).
(10) Press the CDII/SET/COUNTER RESET
button to confirm the selected volume
level.
remains in the display and the timer
setting has been perfected.
(11) Switch the system off.
The selected function is automatically
switched on and off at the time set.
If you select the AUX:
Follow steps (1)~(11) except steps (2)~(3)
of Ô3. If you want to select the TUNERÕ.
If you select the CD or TAPE:
Follow steps (4)~(11) of the Ô3. If you
want to select the TUNERÕ. explanation
section.
4. To cancel or check the timer.
Each time the
TIMER button is pressed you
can select the timer activating or cancel. You can
also check the timer setting status.
To activate or check the timer, press the
button so that Ò
Ó lights up in the display.
To cancel the TIMER, press the
so that Ò
Ó in the display goes out.
NOTES:
1. When the CD or TAPE is selected for playback, if
no disc is entered in the disc drawer or no
cassette tape is entered in the cassette deck, the
TUNER function will be operated.
2. When the CD programmed playback, the REPEAT
ALL DISC will be selected automatically.
AUTO FUNCTION SELECT SYSTEM
This unit has an auto function select system for
various functions. i.e. If a function is in operation(e.g.
radio reception), and you wish to switch to
another(e.g. cassette playback), all you have to do is
select the desired function(cassette playback) directly,
the
unit
automatically
function(cassette recorder).This applies for the
following functions:
TIMER
TIMER button
switches
to
the
new
3. When the TAPE is selected for playback, if both
cassette decks have cassette tapes in; the
cassette tape in deck 2 will be selected first.
4. The timer-off function will be operated only in the
case of power-on by the timer on.
Sleep Timer Setting
(Operating with only the remote control)
When the sleep timer is used, the power is
automatically turned off after the specified time has
elapsed.
1. To specify the time until the power is turned
off, Press the SLEEP button. In the display you
can see
means that the units turns off automatically after
90 minutes.
Each time the button is pressed the time interval
before it turns off is reduced by 10 minutes. i.e.
80...70...etc.
Select the desired time to turn off.
2. To check the remaining time until the power is
turned off.
While the sleep function is active press the
SLEEP button briefly. The time remaining until it
turns off is displayed for about 5 seconds.
NOTE:
If you press the SLEEP button while the sleep time is
displayed, the SLEEP time is set again.
3. To cancel the sleep timer mode
If you wish to stop the function press the SLEEP
button repeatedly until 10 appears, and then press
the SLEEP button once again while 10 is
displayed.
1. On the remote control
TUNER
: PRESET
CD
: PLAY/PAUSE(
TAPE
: FORWARD (
PLAY button (OPTIONAL)
2. On the unit
CD
: DISC DIRECT PLAY buttons
(DISC 1, 2, 3)
17
for about 5 seconds. This
/
buttons
/
) button
) and REVERSE (
)
Hide quick links:
Advertisement
Table of Contents
