Operating; Basic Operations; Cd/Usb Operations; Auto Play - LG CMS4360F Owner's Manual

Basic Operations

CD/USB Operations

1. Insert the disc by pressing R on the remote
control or unit.
Or connect the USB device to the USB port.
2. Select CD or USB function by pressing
FUNCTION.
To
Stop Press I on the remote control.
Press z on the remote control
Playback
or unit.
During playback, press z on the
Pause
remote control or unit.
Searching Press and hold Y/U on
for a section the remote control or unit during
within
playback and release it at the point
a track/file
you want to listen to.
- In stop status,
Press Y/U on the remote
control or unit to go to the next/
previous track/file.
- During playback,
Skipping to
press U on the remote control or
the next/
unit to go to the next track/file.
previous
track/file
Playing less than 2 seconds, press
Y on the remote control or unit
to go to the previous track/file.
Playing after 3 seconds, press Y
on the remote control or unit to go
to the beginning of the track/file.
Playing Press REPEAT on the remote
repeatedly or control repeatedly. Refer to the note
randomly for details about the display change.
Do this
,
Note
y The display changes in the following order.
USB MP3/WMA CD
RPT 1 RPT 1
RPT*DIR RPT DIR
RPT ALL RPT ALL
RANDOM RANDOM
OFF OFF
*DIR : Directory
y When you play programmed list, only RPT 1
and RPT ALL are available.
y Even after restarting the unit or switching
one function to another, you can listen to
music from the point where it' s last been
played.
y If you leave the disc tray open for 5 minutes,
it will close automatically.

Auto Play

AUDIO/MP3/WMA CD is played automatically after
disc tray is open and then closed.
Automatically switches to the CD function if disc tray
is open and then closed when there is no disc in tray.

Operating

17
AUDIO CD
RPT 1
-
RPT ALL
RANDOM
OFF
3