Ancona Gas cooktop User's Manual & Installation Instructions page 27

WARNING
Failure to make the appropriate conversion can result in serious personal injury and property
damage.
TOOLS YOU WILL NEED FOR CONVERSION
7mm Nut Driver
A. ADJUST THE REGULATOR
a) Disconnect all electrical power, at the main circuit breaker or fuse box.
b) Shut off the gas supply to the cooktop by closing the manual shut-off valve.
c) Adjust the pressure regulator by doing the following:
1) Unscrew the regulator cap with the wrench (see Figure 19).
Wrench
Small Flat-head Screwdriver (2 to 2.4 mm or 3/32" tip size, 60 mm long)
Safety Glasses
Figure 19
27