Adjustment And Replacement For The Timing Belt - Brother 2340CV Service Manual

HOW TO ADJUST......
Presser
lever
Belt cover c
1. Remove the the cloth plate cover c.
2. Remove the presser lever.
3. Slide the belt cover c downward to remove it.
4. Remove the rear cover c.
Handwheel
5. Adjust the belt tension by moving the motor plate right and left so that the belt can be pushed down 5.0 - 6.0 mm
when applying a pressure of 500g.
NOTE • When the belt is worn, replace it in the same manner.
• The 3p socket and the oil pan should be parallel.
6. After adjustment, assemble the covers in the reverse order.

Adjustment and replacement for the timing belt

Cloth plate
cover c
Rear cover c
Handwheel
Timing belt
Parallel
Oil pan
Motor plate
3P socket
Timing belt
5.0 - 6.0 mm
Motor handwheel
Front cover
Motor
13