NEC MultiSync LCD1525V Service Manual page 33

Controls
Controls
OSM Controls
The OSM controls on the front of the monitor provide the following
functions:
To access OSM press any of the control buttons (
button.
Main Menu
EXIT Exits the OSM controls.
CONTROL / Moves the highlighted
area up/down to select
one of the controls
CONTROL / Moves the highlighted
area left/right to select
control menus.
PROCEED Has no function.
RESET Resets the highlighted
control menu to the factory
setting.
NOTE: When RESET is pressed, a warning window will appear allow-
ing you to cancel the RESET function.
, , , ) or the PROCEED
Sub-Menu
Exits to the OSM main
menu.
Moves the highlighted
area up/down to select
one of the controls
Moves the bar left/ right
to increase or decrease
the adjustment.
Activates Auto Adjust
feature.
In Tool and Information
Mode, opens additional
window.
Resets the highlighted
control to the factory
setting.
1-30
E - 11