NEC MultiSync LCD1525S Setup Instructions

For windows 95/98 & nt computers

Hide thumbs Also See for MultiSync LCD1525S:

Download this manual See also: User Manual

NEC Technologies, Inc. MultiSync LCD

Setup instructions for Windows 95/98 & NT Computers

the MultiSync LCD

Once you have booted up your computer and have entered Windows, please follow the instructions below

Step 1

Auto Adjust your MultiSync LCD monitor.

For Optimal Performance

1525S

1280x1024 @ 60Hz.

to fully optimize your MultiSync LCD monitor.

To begin the setup/adjustment of the NEC MultiSync LCD

push any of the CONTROL buttons on the front bezel of the monitor

to bring up the NEC On Screen Manager .

Press the right arrow to highlight the „AUTO‰ tab and to select the

„AUTO ADJUST‰ menu in green.

Press the š„PROCEED‰ button to initiate the Auto Adjust Function

(This function will take a few seconds to be completed).

Press EXIT to close the OSM

(Proceed to Step 2)

see reverse side

1525S

should be set up for

menu.

monitor,

1525S

Part No.78659051

Printed in Japan

Page 1 1525S 1280x1024 @ 60Hz. To begin the setup/adjustment of the NEC MultiSync LCD push any of the CONTROL buttons on the front bezel of the monitor to bring up the NEC On Screen Manager .
Page 2 Repeat Step 1. This will ensure that the monitor is auto-adjusted to the new resolution. If you have questions regarding the setup of your MultiSync LCD monitor, please refer to the user’s manual or contact the NEC Technical Support Center at 1-800-632-4662.

Su1525s