C.S.A. C22.2 No. 950. FCC Information 1. Use the attached specified cables with the LCD1525M color monitor so as not to interfere with radio and television reception. (1) Please use the supplied power cable or equivalent to ensure FCC compliance.
MultiSync LCD 1525M monitor with Video Signal Cable Audio Cord Power Cord USB Cable * Remember to save your original box and packing material to transport or ship the monitor. 78134672.wpc LCD monitor box* should ® User’s Manual 7/16/99, 2:25 PM...
Place the Video Signal Cable under Clip B (Figure C1). 4. Connect the audio cable to “Line-in” on the back of the monitor and the other end to the “Audio out” terminal of the computer. Place the Audio cable under Clip C (Figure D.1).
Page 6
Quick Start cont. Figure A.1 Clip A Clip B 78134672.wpc Figure C.1 Figure D.1 Figure B.1 Clip C 7/16/99, 2:25 PM...
Page 7
Quick Start Figure E.1 A Type B Type Figure F.1 Figure G.1 Figure H.1 Figure I.1 78134672.wpc 7/16/99, 2:25 PM...
Quick Start cont. Tilt Grasp both sides of the monitor screen with your hands and adjust the tilt as desired (Figure TS.1). Remove Monitor Stand for Mounting To prepare the monitor for alternate mounting purposes: 1. Remove the back cover and the cable cover (Figure R.1).
5. Pull out the AC Adapter and cord (Figure AC.4). 6. Reattach the bottom panel to the stand. To connect the AC Adapter outside of the stand, plug the AC Adapter cord to the back of the monitor “DC in” (Figure AC.5).
Controls (On-Screen-Manager) Controls ™ To acess OSM press any of control buttons ( To mute volume, press the RESET button. The OSM controls on the front of the monitor function as follows: Control Main Menu Exits the OSM controls. EXIT...
Page 11
OSM Turn Off: The OSM control menu will stay on as long as it is in use. In the OSM Turn Off submenu, you can select how long the monitor waits after the last touch of a button to shut off the OSM control menu. The preset choices are 10, 20, 30, 60 and 120 seconds.
• In UK, use a BS-approved power cord with molded plug having a black (5A) fuse installed for use with this monitor. If a power cord is not supplied with this monitor, please contact your supplier. Immediately unplug your monitor from the wall outlet and refer servicing to qualified service personnel under the following conditions: •...
Do not use primary color blue on a dark background, as it is difficult to see and may produce eye fatigue to insufficient contrast For more detailed information on setting up a healthy work environment, call NEC at (800) 820-1230, NEC FastFacts document #900108 or write the American National Standard for Human Factors Engineering of Visual Display Terminal Workstations –...
640 x 480* at 60 Hz to 75 Hz 800 x 600* at 56 Hz to 75 Hz 832 x 624* at 75 Hz 1024 x 768 at 60 Hz to 75 Hz ... NEC cites recommended resolution at 304 mm/12.0 inches 228 mm/9.0 inches AC 100 –...
(Intelligent Power Manager) System: Provides innovative power-saving ™ methods that allow the monitor to shift to a lower power consumption level when on but not in use, saving two-thirds of your monitor energy costs, reducing emissions and lowering the air conditioning costs of the workplace.
To alleviate image persistence, turn the monitor off for as long as an image was displayed. If an image was on the monitor for one hour and a ”ghost” of that image remains, the monitor should be turned off for one hour to erase the image.
References • BBS NEC Technologies’ Remote Bulletin Board System is an electronic service accessible with your system and a modem. Communication parameters are: 300/1200/2400/9600/14.4k/28.8k/33.6k bps, no parity, 8-data bits, 1 stop bit • Customer Service/ Technical Support • Electronic Channels:...
Limited Warranty NEC Technologies, Inc. (hereinafter “NECTECH”), warrants this Product to be free from defects in material and workmanship and, subject to the conditions set forth below, agrees to repair or replace (at NECTECH’s sole option) any part of the enclosed unit which proves defective for a period of three (3) years from the date of first consumer purchase.
TCO’95 Congratulations! You have just purchased a TCO’95 approved and labeled product! Your choice has provided you with a product developed for professional use. Your purchase has also contributed to reducing the burden on the environment and also, to the further development of environmentally adapted electronics products.
Page 20
TCO’95 cont. toxins, PCBs, which are suspected to give rise to similar harm, including reproductive damage in fisheating birds and mammals, due to the bio-accumulative* processes. Flame retardants have been found in human blood and researchers fear that disturbances in foetus development may occur.
AFIN D’ÉVITER TOUT RISQUE D’INCENDIE OU D’ÉLECTROCUTION, NE PAS EXPOSER CET APPAREIL À LA PLUIE OU À L’HUMIDITÉ. NE PAS UTILISER LA FICHE D’ALIMENTATION POLARISÉE AVEC UNE PRISE DE CORDON DE RALLONGE OU AUTRE PRISE SAUF SI LES BROCHES PEUVENT ÊTRE ENTIÈREMENT INTRODUITES. NE PAS OUVRIR LE BOÎTIER, LEQUEL CONTIENT DES COMPOSANTS À...
Macintosh pour MultiSync LCD NOTA : Pour obtenir un adaptateur de câble Macintosh pour le MultiSync LCD appelez NEC Technologies au (800) 820-1230. Retirez le cache-connecteurs au dos du moniteur. 3. Branchez le mini-connecteur D-SUB à 15 broches de câble vidéo aux connecteurs appropriés à...
Page 24
Mise en marche rapide (suite) Figure A.1 Figure B.1 L’attache A L’attache B L’attache C Figure C.1 Figure D.1 78134672.wpc 7/16/99, 2:25 PM...
Page 25
Mise en marche rapide (suite) Figure E.1 A Type B Type Figure F.1 Figure G.1 Figure H.1 Figure I.1 78134672.wpc 7/16/99, 2:25 PM...
Page 26
Mise en marche rapide Incliner et pivoter Placez les mains de chaque côte du moniteur et réglez l’inclinaison et la position souhaitées (Figure TS.1). Enlever le support du moniteur pour le montage Pour préparer le moniteur à différents types de montage : 1.
Mise en marche rapide Enlever l’adaptateur CA le support du moniteur Pour enlever l’adaptateur CA : 1. Retirez le courvercle arrière et le courvercle du câble (Figure AC.1). 2. Déconnectez tous les câbles. 3. Placez le moniteur la face vers le bas sur une surface non abrasive (Figure AC.2).
Commandes Pour accéder au menu OSM, appuyez sur une des touches de commadnde ) ou sur la touche PROCEED. Pour volume en sourdine, sur le bouton RESET. Les touches de commandes OSM fonctionnent comme suit : Menu principal Quitte le menu OSM. EXIT Déplace la zone en surbrillance vers CONTROL...
Commandes Réglage image H.Size : Régle la dimension horizontale de l’image en augmentant ou en diminuant le format horizontal. FIN : Améliore la mise au point, la netteté et la stabilité de l’image en augmentant ou en di,imuant la valeur Fin. Réglage automatique : Ajuste automatiquement le réglage du format H.Size ou la résolution Fine.
Usage recommandé Consignes de sécurité et d’entretien POUR UN FONCTIONNEMENT OPTIMAL, PRIÈRE DE NOTER CE QUI SUIT POUR LE RÉGLAGE ET L'UTILISATION DU MONITEUR COULEUR MULTISYNC • NE PAS OUVRIR LE MONITEUR. Aucune pièce intérieure ne nécessite l'intervention de l'utilisateur, et l'ouverture ou la dépose des couvercles peut entraîner des risques de décharges électriques dangereuses ou d'autres risques.
Page 31
Pour des informations plus détaillées sur l'établissement d'un environnement de travail sain, appeler NEC au (800) 820-1230, demander le service d’information par télécopieur NEC FastFacts au (800) 366-0476 et demander le document n 900108 ou écrire à...
Matrice active; transistor à film fin (TFT); affichage àcristaux liquides (LCD); pas 0,30 mm; luminance blanche 200 cd/m taux de contraste caractéristique 350:1. Dépend de la carte vidéo utilisée. Automatique Automatique NEC recommande une résolution à 75 Hz pour des performances d’affichage optimales. 7/16/99, 2:26 PM...
(balayage complet) : Permet d'utiliser la totalité de la surface d'écran dans Capacité FullScan la plupart des résolutions, augmentant ainsi de façon significative la taille de l'image. OSM Display Screen Copyright 1999 par NEC Technologies, Inc. 78134672.wpc 7/16/99, 2:26 PM...
«fantôme» de cette image, il faut mettre le moniteur hors tension pendant une heure pour effacer l’image. NOTA : Tout comme dans le cas des écrans personnels, NEC recommande l’utilisation d’un économiseur d’énergie à intervalles réguliers lorsque l’écran n’est pas utilisé.
Références • BBS Le système de babillard électronique NEC Technologies est un service électronique accessible avec votre système et un modem. Les paramètres de communication sont : 300/1200/2400/9600/1,4 k/28,8 k bps, pas de parité, 8 bits de données, 1 bit d'arrêt •...
Garantie limitée NEC Technologies, Inc. (ci-après «NECTECH») garantit que ce produit est exempt de vice de fabrication et de main-d’oeuvre et, selon les conditions énoncées ci-dessous, accepte de réparer ou remplacer, à sa discrétion, toute pièce de l'appareil concerné qui s'avérerait défectueuse et ce, pendant une période de trois (3) ans à...
TCO’95 Félicitations! Vous avez acheté un produit qui répond à la directive TCO’95. En choisissant ce produit conçu pour une utilisation professionnelle, vous contribuez aussi à la réduction des effets nuisibles sur l’environnement et aussi au développement continu de produits électroniques respectueux de l’environnement.
Page 38
TCO’95 chez les oiseaux piscivores et les mammifères, attribuable aux processus biocumulatifs*. La présence de retardateurs de flamme a été détectée dans le sang humain et les chercheurs craignent que le développement du fœtus pourrait être perturbé. La directive TCO’95 exige que les composants en plastique pesant plus de 25 grammes ne contiennent pas de chlore ou de brome organiquement liés.
Page 39
FCC. MultiSync est une marque déposée de NEC Technologies, Inc. aux États-Unis et de NEC Home Electronics, Ltd. au Canada, au R.-U., en Allemagne, en France, en Espagne, en Italie, en Autriche, au Benelux, en Suisse, au Danemark, en Finlande et en Arabie Saoudite. AccuColor, et ErgoDesign sont des marques déposées de NEC Technologies, Inc.
FCC Rules. MultiSync is a registered trademark of NEC Technologies, Inc. in the U.S. and of NEC Home Electronics, Ltd. in Canada, UK, Germany, France, Spain, Italy, Austria, Benelux, Switzerland, Denmark, Finland, Norway and Saudi Arabia. AccuColor, OptiClear and ErgoDesign are registered trademarks of NEC Technologies, Inc.