Brother FAX560 Service Manual page 154

EEPROM Customizing Codes
This function allows you to customize the EEPROM according to language, function settings, and
firmware switch settings. The customizing codes list is given on the next page.
Operating Procedure
(1) American models: Press the Function, *, 2, 8, 6, and 4 keys in this order to make the
equipment enter the maintenance mode.
European models: Press the Menu, *, 2, 8, 6, and 4 keys in this order to make the equipment
enter the maintenance mode.
FAX645/FAX685MC/MFC960MC:
description given for European models; for the Asian version, apply that given for American
models.
The equipment beeps for approx. one second and displays "
the LCD.
(2) Press the 7 and 4 keys in this order in the initial stage of the maintenance mode.
The current customizing code (e.g., 9001 in the case of FAX560 U.S.A. versions) appears.
(3) Enter the desired customizing code (e.g., 0002 in the case of FAX580MC Canadian versions).
The newly entered code appears.
NOTE: If a wrong 4-digit code is entered, the equipment will malfunction.
(4) Press the Start key.
The equipment saves the setting and returns to the initial stage of the maintenance mode.
If you press the Stop key or no keys are pressed for one minute in the above procedure, the
equipment stops the procedure and returns to the initial stage of the maintenance mode.
Within 2 seconds
Within 2 seconds
For the Oceanic version of those models, apply the
" on