Creating A Waypoint - Lowrance HDS Gen3 Touch Quick Start Manual

Cursor assist mode
Press and hold your finger on the screen to switch the cursor to cursor assist mode.
The selection tool will appear above your finger. Drag the selection tool over the
desired item.

Creating a waypoint

The waypoint will be positioned at the cursor when the cursor is active. When the
cursor is not active, the waypoint will be positioned at your current location.
¼ Note:
Press the dedicated waypoint key twice to quickly save a waypoint.
Sonar
Adjusting sonar settings
Sensitivity and Colorline are adjusted by dragging the slide bar vertically. The slide
bar is accessed by tapping Sensitivity or Colorline on the Sonar menu.
|
7
HDS Gen3 Touch | QuickStart Guide