Removal Of Front Glass, V1, V2-Board And Cabinet Assy - Panasonic TH-42PF30U Service Manual

3. Remove the A-Board Block.
(Refer to remove of SS-Board).
4. Remove the S1-Board Block.
(Refer to remove of S1-Board).
5. Remove 5 screws and then remove the Hanger Assy (L)
and the Stand Pole Bracket Assy (L).
6. Remove the flexible cables from the connectors (C20,
C21, C23).
7. Remove 8 screws ( ) and then remove the flexible
cables from the connectors (CB8, CB9, CB10, CB11,
CB12, CB13, CB14, CB15).
8. Remove 4 screws ( ) and then remove C2-Board.
8.16. Removal of Front Glass, V1,
V2-Board and Cabinet Assy
1. Remove the Speaker Terminal Block.
(Refer to remove of H3-Board).
2. Remove the S1-Board Block.
(Refer to Removal of S1-Board)
3. Disconnect the connectors (A11, A22).
4. Remove 7 screws ( ) and then remove the Handle Fixing
Metal (L, R).
5. Remove 2 screws ( ).
Note: when fixing Handle Fixing Metal (L, R)
• Screw on 2 screws (1) firstly.
6. Pull the bottom of the Plasma Display Panel forward
(arrow1).
7. Slide the Plasma Display Panel and then remove the
Plasma Display Panel (arrow2).
8.16.1. Notice when Front Glass od Cabi-
net Assy is exchanged
Please use the Aluminum Tapes when you exchange the Front
Glass or the Cabinet Assy.
27
TH-42PF30U